| 机台参数： | | | | | |
| 机械型号 Machine Type | Unit | KT-200R |
| 射出系统 | 螺杆直径 Screw diameter4045 | mm | 25 | 30 | 35 |
| 射出压力 Injection pressure | kg/cm2 | 2509 | 1742 | 1280 |
| 理论射出容量 Theoretical Shot Volume | cm3 | 59 | 85 | 115 |
| 射出重量 (P.S.) Injection weight(P.S.) | g/oz | 54/1.9 | 77/2.5 | 105/3.7 |
| 射出率 Injection rate | cm3/sec | 36 | 52 | 71 |
| 螺杆行程 Screw Stroke | mm | 120 |
| 螺杆转速 Screw speed | r.p.m | 0-190 |
| 射嘴接触力 Nozzle Contact force | tons | 2.4 |
| 射嘴行程 Nozzle Retraction Stroke | mm | 180 |
| 温度控制段数 No.of heating zones | / | 3 |
| 料斗容量 Material Hopper Capacity | l | 20 |
| 锁模系统 | 锁模力 Clamping Force | tons | 45 |
| 开模力 Opening Force | tons | 8.3 |
| 转盘直径 Rotary Table Dimemter | mm | ￠740 |
| 最小模厚 Min mold thickness | mm | 200/150 |
| 开模行程 Opening stroke | mm | 200 |
| 最大开模距离 Max. daylight opening | mm | 400/350 |
| 顶出力 Ejector force | tons | 1.3 |
| 顶出行程 Ejector stroke | mm | 50 |
| 油压电力系统 | 圆盘站数 Rotary Station | -- | 2-4 |
| 最大模具重量 Max Mold Weight | kg | 90*2/80*3 |
| 滑模定位精度 Station Clearance | mm | ±0.02 |
| 最大液压压力 Max Hydraulic Pressure | kg/cm2 | 140 |
| 泵浦吐出量 Pump Output | liters/min | 43-17 |
| 作动油量 Oil Reservoir Capacity | liters | 130 |
| 冷却水用量 Cooling Water Consumption | liters/hr | 600-800 |
| 油压马达电力 Pump Motor Power | kw | 7.5 |
| 电热容量 Barrel Heating Power | kw | 3.5 |
| 总用电量 Total Wattage | kw | 11 |
| 机械重量（约） Machine weight(about) | tons | 2.6 |
| 其它 | 机械外型尺寸 Machine dimension(L*W*H) | m | 1.98*1.48*3.08 |
| 付船重量 Shipping Weight | tons | 3.1 |
| 付船尺码 Shipping Measurements(L*W*H) | m | 2.1*1.6*2.3 |